- "EXTEND™ Warranty" is a required field.
DS200TCCAG1B
DS200TCCAG1B (GE I/O TC2000 Analog Board) features one 80196 microprocessor, multiple PROM modules, one LED and two 5-pin connectors. From the side view of DS200TCCAG1B (Mark V series), you can see the LED. JCC and JDD are the ID?s for the 50-pin connectors.
A programmable logic device and 3 jumpers also occupy DS200TCCAG1B (GE I/O TC2000 Analog Board). Usually a site will install a replacement that is just like the original DS200TCCAG1B (Mark V series) when you replace DS200TCCAG1B (Mark V series). The drive will function the same as before, prior to the replacement DS200TCCAG1B (Mark V series).
What enables DS200TCCAG1B (GE I/O TC2000 Analog Board) to perform the same? The jumpers from the ?defective? DS200TCCAG1B (Mark V series) can be set the same on the new DS200TCCAG1B board. The configuration will be identical and offer the same processing.?
In order to have correct jumper placement, remove the defective DS200TCCAG1B (Mark V series) and place it on a clean, level surface. Next you?ll have to remove the replacement DS200TCCAG1B (Mark V series) from the static protective bag and put it next to the defective DS200TCCAG1B (Mark V series) on a flattened static protective bag. Be sure to wear a wrist strap when examining the jumpers on the defective DS200TCCAG1B (Mark V series), then correct the new DS200TCCAG1B (Mark V series) board.
From the extensive product testing, all versions of DS200TCCAG1B (Mark V series) are compatible to the drive so it will process the same when installed in the drive.
Note: Unused and Repair items include a standard 2-Year warranty, and Reman items include a 3-Year warranty. To add years to your warranty, please select from the EXTEND™ Warranty field below.
Sell Surplus: Sell Now
Exchange Credit: Learn more about our exchange credit program
Disclaimer: Buyer acknowledges and agrees that all products purchased from GTC for export are subject to control under, and must strictly comply with, U.S. Law including, but not limited to, applicable provisions of the U.S. Export Administration Regulations (15 CFR Part 730 et. seq.) (EAR) and the Economic Sanctions Regulations (31 CFR Parts 501 – 598) (ESR).
GTC’s large inventory investment includes DS200TCCAG1B. GTC’s highly skilled technicians have the training and expertise to repair DS200TCCAG1B. In addition, our DS200TCCAG1B repairs come with a warranty. Please fill out our Request a Quote form with DS200TCCAG1B in the Subject Line, and/or include DS200TCCAG1B in the Message, for additional information about GTC’s DS200TCCAG1B. A GTC Business Development Leader will assist you with your DS200TCCAG1B needs shortly!
GTC Mark V TCPS
We offer clients the choice to use newer, upgraded Power Supply Cards which offers better power distribution and stability for your panel. The noise projected by the OEM TCPS card is no longer a feature with our new (aftermarket) GTC-TCPS card. Ask your GTC Sales Representative for specific details and data.
GTC Mark V PTBA
The OEM says your equipment is “obsolete” – GTC calls it “Classic”, with the ability to operate safely and reliably for as long as you need. We developed a direct replacement that consists of the same fit, form and function as the original, but with the added benefit of upgraded components. We offer clients both options to buy the original OEM or the GTC direct replacement. Ask your GTC Sales Representative for specific details and data.
GTC offers its HMI Replacement In Kind (RIK) product for Mark V, Mark VI & Mark Vie to operators looking to replace their ageing CPU hardware with new. The RIK HMI is built with Industrial quality specifications and ensuring the HDD or SSD will contain the correct site-specific configuration. These units are direct plug and play ready.
GTC Maintains the worlds largest independent collective inventory of spares for the GE Speedtronic Mark II, Mark IV, Mark V, Mark VI, MKVIe Turbine controls and a strong stock of EX2000, EX2100, LS2100 and Bently 3500. Parts are made up of Unused and Remanufactured condition all of which are supplied by GTC’s 3 standard year warranty which is also extendable entering the GTC Extend Warranty Program.
GTC continuously buys surplus and disused GE Turbine and Excitation controls, as well as faulty cards. We invest in excess of over 2 million USD annually to keep inventory available to Operators who can no longer buy from the OEM or choose not to buy from them. With the many hours we put into each and every part we purchase to remanufacture and test, buyers are always guaranteed to receive the highest quality parts which are considered to function as good as, or in some cases, better than new, as improved components are used where possible.
Next time you upgrade your system, part of your system, or have faulty cards you wish to dispose of, connect with a GTC Representative and we will give our evaluation.
We offer a full range of services onsite or offsite for the GE Mark II, Mark IV, Mark V, Mark VI, Mark VIe, MarkVIeS, EX2000, EX2100, and LS2100. To learn more, click here.
A brief summary of services:
- Health Checks
- Eprom Backup Service
- Troubleshooting
- Outage Support
- TIL Implementation
- NERC Testing & Reporting
GTC is globally recognized amongst Operators as being a high quality Repair Facility for GE Mark Systems.
With an official record of less than 1% in Warranty Returns, from equipment functions and field operations, to component levels of circuit boards, GTC has the expertise to keep your plant running. Operating for over 20 years, having completed over 10,000+ repairs for numerous clients spanning from GE Turbine and Excitation to LCI Controls, GTC is the most experienced Repair Facility (outside of the OEM), which makes us a reliable and trusted partner to repair your parts.
