DS200FCGDH1B
DS200FCGDH1B, a gate distribution and status card (FCGD), is developed by GE for their Mark V series. DS200FCGDH1B can be installed in various GE brand drives!
DS200FCGDH1B acts as an interface system for the six pulse, phase controlled non-reversing bridge when installed. DS200FCGDH1B is relayed information from the digital signal processing card (DSPC) to solve. Signals concerning diagnostic information and system feedbacks are produced because of this. Feedbacks are then sent out using the drive?s integrated VME backplane.
DS200FCGDH1B is able to collect large amounts of data from the drive?s integrated DSPC. Signals received by DS200FCGDH1B are rendered into cell gating signals. Every system bridge legs receive these cell gating signals and return multiplexed cell status information to DS200FCGDH1B.
Three FGPA boards send feedback signals through fiber optic connections on DS200FCGDH1B. Frequency, voltage and board status information are included in this feedback. An integrated IMOK LED status indicator supplies users with basic system status.
To minimize risk of device malfunction or error, manufacturer provided installation parameters for DS200FCGDH1B should be met. Board function depends on correct wiring! A guide on how to wire and install DS200FCGDH1B is available in the device?s manual.
Note: Unused and Repair items include a standard 2-Year warranty, and Reman items include a 3-Year warranty. To add years to your warranty, please select from the EXTEND™ Warranty field below.
Sell Surplus: Sell Now
Exchange Credit: Learn more about our exchange credit program
Disclaimer: Buyer acknowledges and agrees that all products purchased from GTC for export are subject to control under, and must strictly comply with, U.S. Law including, but not limited to, applicable provisions of the U.S. Export Administration Regulations (15 CFR Part 730 et. seq.) (EAR) and the Economic Sanctions Regulations (31 CFR Parts 501 – 598) (ESR).
GTC’s large inventory investment includes DS200FCGDH1B. GTC’s highly skilled technicians have the training and expertise to repair DS200FCGDH1B. In addition, our DS200FCGDH1B repairs come with a warranty. Please fill out our Request a Quote form with DS200FCGDH1B in the Subject Line, and/or include DS200FCGDH1B in the Message, for additional information about GTC’s DS200FCGDH1B. A GTC Business Development Leader will assist you with your DS200FCGDH1B needs shortly!
GTC Mark V TCPS
We offer clients the choice to use newer, upgraded Power Supply Cards which offers better power distribution and stability for your panel. The noise projected by the OEM TCPS card is no longer a feature with our new (aftermarket) GTC-TCPS card. Ask your GTC Sales Representative for specific details and data.
GTC Mark V PTBA
The OEM says your equipment is “obsolete” – GTC calls it “Classic”, with the ability to operate safely and reliably for as long as you need. We developed a direct replacement that consists of the same fit, form and function as the original, but with the added benefit of upgraded components. We offer clients both options to buy the original OEM or the GTC direct replacement. Ask your GTC Sales Representative for specific details and data.
GTC offers its HMI Replacement In Kind (RIK) product for Mark V, Mark VI & Mark Vie to operators looking to replace their ageing CPU hardware with new. The RIK HMI is built with Industrial quality specifications and ensuring the HDD or SSD will contain the correct site-specific configuration. These units are direct plug and play ready.
GTC Maintains the worlds largest independent collective inventory of spares for the GE Speedtronic Mark II, Mark IV, Mark V, Mark VI, MKVIe Turbine controls and a strong stock of EX2000, EX2100, LS2100 and Bently 3500. Parts are made up of Unused and Remanufactured condition all of which are supplied by GTC’s 3 standard year warranty which is also extendable entering the GTC Extend Warranty Program.
GTC continuously buys surplus and disused GE Turbine and Excitation controls, as well as faulty cards. We invest in excess of over 2 million USD annually to keep inventory available to Operators who can no longer buy from the OEM or choose not to buy from them. With the many hours we put into each and every part we purchase to remanufacture and test, buyers are always guaranteed to receive the highest quality parts which are considered to function as good as, or in some cases, better than new, as improved components are used where possible.
Next time you upgrade your system, part of your system, or have faulty cards you wish to dispose of, connect with a GTC Representative and we will give our evaluation.
We offer a full range of services onsite or offsite for the GE Mark II, Mark IV, Mark V, Mark VI, Mark VIe, MarkVIeS, EX2000, EX2100, and LS2100. To learn more, click here.
A brief summary of services:
- Health Checks
- Eprom Backup Service
- Troubleshooting
- Outage Support
- TIL Implementation
- NERC Testing & Reporting
GTC is globally recognized amongst Operators as being a high quality Repair Facility for GE Mark Systems.
With an official record of less than 1% in Warranty Returns, from equipment functions and field operations, to component levels of circuit boards, GTC has the expertise to keep your plant running. Operating for over 20 years, having completed over 10,000+ repairs for numerous clients spanning from GE Turbine and Excitation to LCI Controls, GTC is the most experienced Repair Facility (outside of the OEM), which makes us a reliable and trusted partner to repair your parts.
