DS200DTBBG1A
DS200DTBBG1A (GE Terminal Digital Connector Board) is part of the Mark V series which features two terminal blocks for 95 signal wires in each and contains three 50-pin connectors. JFF, JFG, and JFH are the IDs for the 40-pin connectors, and the board is also populated with bayonet connectors and 5 jumpers.
It is important to track which 40-pin ribbon cable is connected to which connector since the board has three 40-pin connectors. If the wrong ribbon cables are connected to the wrong connectors, you will have to bring down the drive, correct the placement of ribbon cables to connectors and restart the drive.
There is potential for a maximum of 110 signal wires to be attached to the terminal blocks, but it can be difficult to manage without documenting where the separate signal wires are connected.
TB1 is assigned as the ID for one terminal block, and TB2 is assigned as the ID for the second terminal block. Each terminal is numbered in sequence. To identify a specific terminal, use the terminal block ID as well as the number assigned to the terminal (i.e. TB1 90 and TB2 48. TB1 90 is terminal block one and TB2 48 is terminal 48 on terminal block two).
DS200DTBBG1A (Mark V series) is the closing for digital contact inputs 47-96. For DS200DTBBG1A (Mark V series), it is suggested you bring field contacts back in pair to the correct input terminals on DS200DTBBG1A.
If DS200DTBBG1A (Mark V series) uses 24 VDC inputs, you will need to use an external power supply with DS200DTBBG1A. To successfully complete this, remove the power connector from power distribution core and connect 24 VDC to DS200DTBBG1A (Mark V series).
The solid state field contacts on DS200DTBBG1A (Mark V series) may continue to present an adequate voltage in an Open state to cause the DS200DTBBG1A (Mark V series) to read the contact as Closed.
Note: Unused and Repair items include a standard 2-Year warranty, and Reman items include a 3-Year warranty. To add years to your warranty, please select from the EXTEND™ Warranty field below.
Sell Surplus: Sell Now
Exchange Credit: Learn more about our exchange credit program
Disclaimer: Buyer acknowledges and agrees that all products purchased from GTC for export are subject to control under, and must strictly comply with, U.S. Law including, but not limited to, applicable provisions of the U.S. Export Administration Regulations (15 CFR Part 730 et. seq.) (EAR) and the Economic Sanctions Regulations (31 CFR Parts 501 – 598) (ESR).
GTC’s large inventory investment includes DS200DTBBG1A. GTC’s highly skilled technicians have the training and expertise to repair DS200DTBBG1A. In addition, our DS200DTBBG1A repairs come with a warranty. Please fill out our Request a Quote form with DS200DTBBG1A in the Subject Line, and/or include DS200DTBBG1A in the Message, for additional information about GTC’s DS200DTBBG1A. A GTC Business Development Leader will assist you with your DS200DTBBG1A needs shortly!
GTC Mark V TCPS
We offer clients the choice to use newer, upgraded Power Supply Cards which offers better power distribution and stability for your panel. The noise projected by the OEM TCPS card is no longer a feature with our new (aftermarket) GTC-TCPS card. Ask your GTC Sales Representative for specific details and data.
GTC Mark V PTBA
The OEM says your equipment is “obsolete” – GTC calls it “Classic”, with the ability to operate safely and reliably for as long as you need. We developed a direct replacement that consists of the same fit, form and function as the original, but with the added benefit of upgraded components. We offer clients both options to buy the original OEM or the GTC direct replacement. Ask your GTC Sales Representative for specific details and data.
GTC offers its HMI Replacement In Kind (RIK) product for Mark V, Mark VI & Mark Vie to operators looking to replace their ageing CPU hardware with new. The RIK HMI is built with Industrial quality specifications and ensuring the HDD or SSD will contain the correct site-specific configuration. These units are direct plug and play ready.
GTC Maintains the worlds largest independent collective inventory of spares for the GE Speedtronic Mark II, Mark IV, Mark V, Mark VI, MKVIe Turbine controls and a strong stock of EX2000, EX2100, LS2100 and Bently 3500. Parts are made up of Unused and Remanufactured condition all of which are supplied by GTC’s 3 standard year warranty which is also extendable entering the GTC Extend Warranty Program.
GTC continuously buys surplus and disused GE Turbine and Excitation controls, as well as faulty cards. We invest in excess of over 2 million USD annually to keep inventory available to Operators who can no longer buy from the OEM or choose not to buy from them. With the many hours we put into each and every part we purchase to remanufacture and test, buyers are always guaranteed to receive the highest quality parts which are considered to function as good as, or in some cases, better than new, as improved components are used where possible.
Next time you upgrade your system, part of your system, or have faulty cards you wish to dispose of, connect with a GTC Representative and we will give our evaluation.
We offer a full range of services onsite or offsite for the GE Mark II, Mark IV, Mark V, Mark VI, Mark VIe, MarkVIeS, EX2000, EX2100, and LS2100. To learn more, click here.
A brief summary of services:
- Health Checks
- Eprom Backup Service
- Troubleshooting
- Outage Support
- TIL Implementation
- NERC Testing & Reporting
GTC is globally recognized amongst Operators as being a high quality Repair Facility for GE Mark Systems.
With an official record of less than 1% in Warranty Returns, from equipment functions and field operations, to component levels of circuit boards, GTC has the expertise to keep your plant running. Operating for over 20 years, having completed over 10,000+ repairs for numerous clients spanning from GE Turbine and Excitation to LCI Controls, GTC is the most experienced Repair Facility (outside of the OEM), which makes us a reliable and trusted partner to repair your parts.
